This type of molding is useful when applying a transition from one floor space to another where the levels are slightly different. This situation sometimes occurs when the transition is between two different flooring materials, for example from a laminate floor to a tile floor, or when the floor of the adjacent room is the same material but installed at a different level.
An end molding can be used as another type of transition molding, but it is more useful when the transition is to an uneven surface such as a high-pile carpet or a thicker variety of tile. An end molding may also be a better choice when your flooring butts an edge such as a sliding glass door, where a quarter round molding may be too small. With a lower profile than a reducer strip laminate molding, an end molding can add a subtle, tailored look to your interior.
T-moldings are useful for doorways or between other flooring sections which are at the same level. For example, if a laminate floor is installed in a particularly long room, a T-molding could be used for tying the two sections together. The T-molding is aptly named – shaped like a “T” – with the beams of the “T” serving as a bridge from one room or flooring section to another.
Quarter round moldings
Quarter round molding butts against your wall with a low, rounded exterior profile that adds a simple, yet tidy touch to your completed laminate flooring installation. This type of molding is often used behind cabinets where a low profile molding is better suited to support an object flush against the wall.
For making a transition from your floor to the edge of a flight of stairs or steps, a stairnose molding is a great solution. The molding sits flat and level on one side with your laminate flooring and closely hugs the first stair or step on the other side, rounding off the edge of the stair and adding a unique finishing touch to your completed laminate flooring project.
Something as simple as a molding can really make all the difference to the overall effect of your new laminate flooring project. Putting in a molding is often an afterthought to some, but the finished visual effect it creates is more often than not the defining feature of the completed project.